BruxZir Shaded 16 is a series of 16 pre-shaded zirconia blanks that match all of the VITA Classical shades, with no color-dipping or staining required. This glaze-and-go system eliminates the dipping and staining stages to greatly increase repeatability, improve turnaround time and lower labor costs.
1. Product Description BruxZir® Shaded 16 Milling Blanks BruxZir Shaded 16 Blanks are used for the production of full-contour zirconia and zirconia-based substructures for crowns and bridges (restorations). Five (5) thicknesses (12 mm, 15 mm, 20 mm, 25 mm, 30 mm) and 16 shades (A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4) are available for milling into BruxZir restorations. The manufactured restorations are made utilizing the CAD/CAM system for design and manufacture. The designed and manufactured restorations are then sintered. No color needs to be added to BruxZir Shaded 16 blanks before sintering. The BruxZir Shaded 16 blanks only require glazing (no staining) to match the monochromatic body shade. Some basic staining may be required if polychromatic (gingival to incisal blend) is desired. The sintered material exhibits maximum strength, and color and translucency similar to natural dentition. Because shrinkage occurs during sintering, it is vital to take into account the appropriate size ratio (enlargement factor) during milling. Attention to the proper enlargement factor (EF) during milling ensures precision fit and marginal accuracy of the sintered restoration. Each blank is labeled with the specific EF to be applied. 2. Indications for Use The device is indicated for use by dental technicians in the construc
55 359,30 FtÁr